QuickTime Inc. Performance Racing Products
Other Racing Parts

RM-210 - Motor Pull Plate (4 hole)

• Fits Ford or Chevy 4-barrel intakes
• Powder coated for corrosion protection
• 4 5/16- 18 x 3/4" bolts and washers included

RM-211 - Motor Pull Plate

• Fits any manufacturer's intake-2 or 4 barrel
• 4 tapped holes for holding mounting bolts when not in use
• 4 5/16- 18 x 3/4" bolts and washers included
• Powder coated for corrosion protection

RM-212 - Universal Ford Pull Plate

• Fits lower base of Ford 5.0 and 5.8 small block fuel injected intake manifolds
• Also fits any manufacturers 2 or 4 barrel intakes
• Includes 4 tapped holes to store bolds when not in use (bolts included!)
• Powder coated for corrosion protection

RM-320 - SBL Lightweight Mid Mounts

• Mounts between engine and transmission
• Notched for starter clearance
• Powder coated for corrosion protection
• Lightest steel mid mount available

RM-330 - SBC Motor Mounts (Front)

• Powder coated for corrosion protection
• Lightest steel motor mount available

RM-6000 - 3" Brake Floater Assembly (Right)

• Lightest brake floater available
• Made from quality H-60 steel
• Threaded inserts
• Zinc plated

RM-6001 - 3" Brake Floater Assembly (Left)

• Lightest brake floater available
• Made from quality H-60 steel
• Threaded inserts
• Zinc plated

RM-6005 - Universal Bird Cage

• Lightest Bird Cage available anywhere
• Built from high grade H-60 steel
• 4 Bar, swing arm, Z-link, floated spring bracket (spring bracket bolt kit sold separately: RM-6006)
• Universal left or right
• 2 - 4/3" to 5/8" reducer bushings included

RM-6006 - Floated Spring Bracket Bolt Kit

• For use with RM-6005 Bird Cage when using a floating spring
• Zinc plated

RM-715 - Harmonic Balance Spacer/3 piece set - NEW!

• Used to align belts on the harmonic balancer pulley
• .060, .090, .125
• Zinc plated steel

RM-716 - Water Pump Spacer/3 piece set- NEW!

• Used to align belts on the water pump pulley
• .060, .090, .125
• Zinc plated steel

RM-1030 - Automatic Bump Start

• This is a top of the Line Bump Start for Power Glide Transmissions
• Includes Bleeder valve, #4 aluminum fitting, 3 cap screws, and O-Ring

RM-420 - Metric GM Spindle Saver (Right)

• Fits GM metric spindles
• Made from lightweight H-60 steel
• Strengthens spindle arm
• Bolts on easily
• Pays for itself over and over
• Zinc plated

RM-421 - Metric GM Spindle Saver (Left)

• Fits GM metric spindles
• Made from lightweight H-60 steel
• Strengthens spindle arm
• Bolts on easily
• Pays for itself over and over
• Zinc plated

RM-422 - 1 Pair Spindle Savers - Packaged

• 1 RM-420, 1 RM-421

RM-425 - Pinto Bump Steer Spacers

• 2.130 Length for Bump Steer Spacing when using Pinto spindles and metric front ends
• Superior crush proof design made from H-60 Grade Steel
• Zinc plated

RM-426R - Pinto-metric Caliper - Gramada Rotor Adapter (Right)

• Adapts metric caliper to Pinto Spindle
• Zinc plated

RM-426L - Pinto-metric Caliper - Gramada Rotor Adapter (Left)

• Adapts metric caliper to Pinto Spindle
• Zinc plated

RM-430 - GM Metric Spindle Gauge

• Checks for bent spindle arms
• Checks for bent spindle yokes
• Made from quality H-60 steel
• Zinc plated
• adjustable

RM-650 - Upper Ball Joint Collar 10° Left

• 5/8" threads with 3/8 bolt holes
• Zinc plated
• Made from high grade steel
• Tig welded

RM-651 - Upper Ball Joint Collar 10° Right

• 5/8" threads with 3/8 bolt holes
• Zinc plated
• Made from high grade steel
• Tig welded

RM-652 - Upper Ball Joint Collar Straight Left

• 5/8" threads with 3/8 bolt holes
• Zinc plated
• Made from high grade steel
• Tig welded

RM-653 - Upper Ball Joint Collar Straight Right

• 5/8" threads with 3/8 bolt holes
• Zinc plated
• Made from high grade steel
• Tig welded

RM-654 - Upper Ball Joint Clevis

• 5/8" threads with 3/8 bolt holes
• Zinc plated
• Made from high grade steel
• Tig welded

RM-655 Large Upper Ball joint Collar

• Larger/Longer Chrysler type screw-in ball joint improves a-arm pitch/roll center
• 5/8" threads with 3/8" bolt hole
• Zinc plated
• Made from high grade steel
• Universal left or right
• Tig welded

RM-603 - Rear-end Spring Cup Perch

• Lightest spring cup perch available
• Made from quality H-60 steel
• Can be welded or clamped to 3" housing%

RM-604 - Rear-end Spring Cup Perch (offset)

• Made from quality steel
• IMCA legal
• Can be welded or clamped
• Made for Maximum forward bite. This bracket will launch you off the corner.
• Zinc plated

RM-600 - 5 ½" spring cup - NEW!

• Made from quality H-60 steel
• Lightest spring cup
• 4 5/16- 18 x 3/4" bolts and washers included
• Powder coated for corrosion protection

RM-601 - Spring Cup

• Made from quality H-60 steel
• Lightest spring cup on the market
• Engineered for durability
• Powder coated for corrosion protection
• Use with 5" or 5 1/2" springs
• up to 1" weight jack bolts/ 2 1/2" tall

RM-602 - Spring Cup (Long)

• Powder coated for corrosion protection
• Use with 5" or 5 1/2" springs
• Made from quality H-60 steel
• Engineered for durability
• Up to 1" weight jack bolts/ 3 1/2" tall

RM-602L - Spring Cup (Long/Long center)

• up to 1" weight jack bolts / 3 1/2" tall
• 3 1/2" long center pipe
• A must for 4 link cars
• Powder coated for corrosion protection
• Use with 5" or 5 1/2" springs
• Made from quality H-60 steel
• Engineered for durability

RM-605 - Spring Cup Swivel

• 3 1/2" tall swivel spring cup
• Eliminate coil bind
• Lightest and most durable swing cup available
• Bolts sold separately
• Zinc plated

RM-605 - 5½" swivel Spring Cup

• Built to fit snug in a 5½ spring cup
• Made from quality H60 grade steel
• Up to 1" weight jack bolts - 2½ tall
• Powder coated for corrosion protection

RM-606 - 1" - 8x8" Gun Drilled Bolt

• For use with RM-605 Spring Cup Swivel
• Gun drilled for weight reduction/solid appearing
• May be used with standard spring cups
• Zinc plated

RM-607 - 1" - 8x11" Gun Drilled Bolt

• For use with RM-605 Spring Cup Swivel
• Gun drilled for weight reduction/solid appearing
• May be used with standard spring cups
• Zinc plated

RM-606N - 1" - 8 x 8 " Gun Drilled Bolt

• Gun drilled for weight reduction/solid appearing
• May be used with standard spring cups
• Broached ½ drive NASCAR style socket
• Zinc plated

RM-610N - 1" - 8 x 5 " Gun Drilled Bolt

• Gun drilled for weight reduction/solid appearing
• May be used with standard spring cups
• Broached ½ drive NASCAR style socket
• Zinc plated

RM-611N - ¾" - 10 x 5 " Gun Drilled Bolt

• Gun drilled for weight reduction/solid appearing
• May be used with standard spring cups
• Broached 3/8 drive NASCAR style socket
• Zinc plated

RM-611N - ¾" - 10 x 8 " Gun Drilled Bolt

• Gun drilled for weight reduction/solid appearing
• May be used with standard spring cups
• Broached 3/8 drive NASCAR style socket
• Zinc plated

RM-608 - 5/8 " - 11x8" Bolt

• For use with RM-605 Spring Cup Swivel
• May be used with standard spring cups
• Zinc plated

RM-609 - 5/8 " - 11x8" Bolt

• For use with RM-605 Spring Cup Swivel
• May be used with standard spring cups
• Zinc plated

RM - 620 - Jam Nuts Steel 5/8" - 11 Threads
RM - 621 - Jam Nuts Steel 3/4" - 10 Threads
RM - 622 - Jam Nuts Steel 1" - 8 Threads
RM - 623 - Aluminum 5/8" - 11 Threads
RM - 624 - Aluminum 3/4" - 10 Treads
RM - 625 - Aluminum 1" - 8 Threads

RM-626 - Aluminum Jack Bolt End

• Fasten to any Quicktime weight jack bolt when using a non-swivel style spring cup.

RM-630 - Weld in Bushings 5/8" - 11 Threads
RM-631 - Weld in Bushings 3/4" - 10 Threads
RM-632 - Weld in Bushings 1" - 8 Threads

• H60 Grade steel
• Grease zirk
• Zinc Plated

RM-633 - Screw in Adapter

• 1" - 8 External threads, 5/8" - 11 internal threads
• Easily convert from 1" weight jack bolts to 5/8" weight jack bolts
• Grease zirk
• Zinc plated

RM-401 - GM Caliper Bracket (Standard 3")

• For Chevy metric brake calipers
• 3" housing and 11.75" rotor
• Weld-on

RM-402 - GM Lightweight Caliper Bracket

• For Chevy metric brake calipers
• 3" housing and 11.75" rotor
• Weld-on

RM-403 - Small Ford 9" C-Clip Retainer - NEW!

• Small Ford/Big Bearing Torino 9"
• H60 Grade Steel/Strongest available anywhere
• Zinc Plated

RM-404 - Big Ford 9" C-Clip Retainer - NEW!

• Big Ford 9"
• H60 Grade Steel/Strongest available anywhere
• Zinc Plated

RM-1050 - Oil Drain Pan

• Drain your oil in, stand up and pump it back out
• Quality aluminum construction
• Complete with discharge hose, spout, quality hand pump, drain plug, roller wheels, handle and scraper
• Stores vertical or horizontal
• 18" x 14" x 8"

RM-2000 - 9" Battery Box Assembly (Weld on)

• Universal lightweight
• Weld to frame
• Includes all battery hold down hardware
• Zinc plated

RM-2005 - 11 " Battery Box Assembly (Weld on)

• Universal lightweight
• Weld to frame
• Includes all battery hold down hardware
• Zinc plated

RM-2010 - 11 " Battery Box Assembly (Universal bolt on)

• Universal lightweight
• Weld to frame
• Includes all battery hold down hardware
• Zinc plated

RM-2011 3/8" x 6" Battery Box Bolt Kit

• 1 pair with washers and lock nuts
• Made from high grade steel
• Zinc plated